GE Datex-Ohmeda Aespire
₹500000.00
About the Product:
The GE Datex Ohmeda Aespire View is compact, durable, with easy to clean surfaces. It comes with a 12-inch ventilation display that showcases waveforms and alarm indicators. The Aespire offers both anesthesia gases and ventilation at the same time. The Aespire View uses the GE SmartVent 7900 as the ventilator system for the anesthesia machine. The ventilation system makes it easy to minimize the space in the ICU or operating room by combining the Ventilator and the anesthesia machine in one. The Aespire View also comes standard with GEs advances Breathing System (ABS). This allows the anesthesia machine to work with low circuit volumes as well as low flow anesthesia
Full Specifications
Height
53.5 in (136 cm)
Width
29.5 in (75 cm)
Depth
29.1 in (74 cm)
Weight
approximately 300 lbs (136 kg)
Tidal volume range
20 to 1500 mL (Volume Control SIMV/PSV and PCV-VG modes); 5 to 1500 mL (Pressure Control Mode)
Incremental settings
20 to 50 mL (increments of 1 mL); 50 to 100 mL(increments of 5 mL); 100 to 300 mL (increments of 10 mL); 300 to 1000 mL (increments of 25 mL); 1000 to 1500 mL (increments of 50 mL)
Minute volume range
0 to 99.9 L/min
Pressure (PInspired) range
5 to 60 cm H2O (increments of 1 cm H2O)
Pressure (Plimit) range
12 to 100 cm H2O (increments of 1 cm H2O)
Pressure (Psupport) range
Off, 2 to 40 cm H2O (increments of 1 cm H2O)
Rate
4 to 100 breaths per minute for PCV-VG, Volume Control and Pressure Control vent modes. 2 to 60 breaths per minute for SIMV/PSV, PSVPro and SIMV vent modes (increments of 1 breath per minute).
Inspiratory/expiratory ratio
2:1 to 1:8 (increments of 0.5)
Inspiratory time
0.2 to 5.0 seconds (increments of 0.1 seconds) (SIMV and PSVPro vent modes)
Trigger window
0 to 80% (increments of 5%)
Flow trigger
0.2 to 1.0 L/min (increments of 0.2 L/min); 1 to 10 L/min (increments of 0.5 L/min)
Inspiration termination level
5 to 75% (increments of 5%)
Backup mode delay
10 to 30 seconds (increments of 5 seconds)